Dental Supplies - Buy Dental Supply - Us Dental Depot Inc
TO ORDER 1 954 874 6325
Fort Lauderdale FLORIDA USA ARGENTINA (54) 11 5258 7148
CORDOBA (54) (351) 569-1409
COLOMBIA (57) 1 489 9051
PERU (51) 1 705 53 71
BRAZIL (55) 11 3711 9401
(0) View Cart
(0) View Cart
Views: 3365
Print
FLEXIBLE MATERIAL ( GFM )
GFM Dental, Flexible partial dentures are comfortable, beautiful, and affordable choice.
The GFM innovation in the Flexible Partial allows the restoration to adapt to the constant movement and flexibility in patients mouths.
It was long thought that removable partial dentures had to be rigid to be effective.
Today's dental professionals are prescribing flexible removable partial dentures because it makes a better, stronger appliance.
GFM Flexible material reduces chair time, eliminates invasive procedures and the cumbersome materials associated with rigid partials. In short, there is no longer any need for metal.
The material in our GFM flexible partials is perfectly suited to the variety of natural conditions in the mouth. Flexibility removes many of the unwanted aspects of metal partials.
There are fewer steps in the treatment process because preparation of natural teeth is unnecessary. Without the metal frame, the fabrication and try-in processes have also been simplified.
In addition, the choice of a GFM partial avoids the placement of metal in your patient's mouth, which allows you to satisfy the patient's interest in metal-free dentistry.
For the dentists, the techniques and tools vary slightly, however you still have control of the fit.
Our Plastics :
GFM Flexibles
GFM Metracrylate
GFM D-Flex , an intermediate strenght , easy to polish polyamida mix, that will change the way you see Flexible partials.
Related to Temperatures
GFM FLEXIBLES : 300 Celcius ( 550 F ), 11 minutes medium cartridge. ( Large +2 )
GFM METACRYTLATE : 300 celcius 20 minutes ( Large +2 )
GFM D-FLEX : 280 Celcius - 15 minutes ( large +2 )
FLEXIBLE POLYAMIDE MEDIUM
Top Class Polyamide with excellent memory and easy to polish
Code Name Price 101667 GFM - GFM- Standard Pink Medium Ea -25mm/ 1In Diam [More info]
u$s 4.99
Add to Cart
101668 GFM - GFM- V-Plast Color Medium Ea-25mm / 1in Diam [More info]
u$s 4.99
103870 GFM - GFM- Clear Color Medium Ea -25mm/ 1In Diam [More info]
u$s 4.99
112775 GFM - GFM- Flex-Light pink color Medium Ea-25mm / 1in Diam [More info]
u$s 4.99
112774 GFM - GFM- Flex-Translucent Con Pink color Medium Ea-25mm / 1in Diam [More info]
u$s 4.99
112773 GFM - GFM- Flex-Translucent Pink color Medium Ea-25mm / 1in Diam [More info]
u$s 4.99
FLEXIBLE POLYAMIDE LARGE
Top Class Polyamide with excellent memory and easy to polish
Code Name Price 103871 GFM - GFM- Standard Pink Color Large Ea -25mm/ 1In Diam [More info]
u$s 5.99
103872 GFM - GFM- V-Plast Large Ea -25mm/ 1In Diam [More info]
u$s 5.99
103873 GFM - GFM- Clear Color Large Ea -25mm/ 1In Diam [More info]
u$s 5.99
112781 GFM - GFM- Flex-Light pink color large Ea-25mm / 1in Diam [More info]
u$s 5.99
D-FLEX TYPE
Our exclusive blend of Plyamides that offer a slightly harder material with an uncomparable high shine.
Polyamide typem 9
High Shine
Same Formula and colors as Luflex and Deflex
AVAILABLE IN 25mm and 22mm diameter cartridges
Temperatures : 280 Celcius - 15 minutes ( large +2 )
1) Flask must be at 80 celcius at the moment of injection ( pre heat )
2) Before polishing process, leave the device in cold watewr for 30 minutes, to recover flexibility
3) After injection, do not cool the flask under the faucet
4) Poliosh like any other acrylic
Recomendamos :
275 grados por 15 minutos1. La mufla este a 80ºC para evitar el choque térmico que puede generar roturas prematuras.
2 Cuando se retira la prótesis de la mufla, previo al pulido, colocarla en agua para permitir que el material absorba la humedad necesaria para evitar roturas prematuras.
3 Despues de injectar, No Enfriar la mufla en Agua fria
4 Pulido como cualquier acrilico
MISMA FORMULA , COLOR y TECNICA DE USO QUE DEFLEX o LUFLEX
Deflex y Luflex son marcas registradas
Code Name Price 112874 GFM - GFM- D-Flex Intense Pink Medium Ea-25mm / 1in Diam ( Cartridge ) 280 Celcius - 15
minutes ( large +2 )... [More info]u$s 7.25
112875 GFM - GFM- D-Flex Intense Pink Large Ea-25mm / 1in Diam ( Cartridge ) 280 Celcius - 15
minutes ( large +2 )... [More info]u$s 9.43
META ACRYLATE MATERIAL
GFM Metracylate is same formula as Flexite Supreme , or Creation CFS.
Temperatures 300 celcius 20 minutes ( Large +2 )
Code Name Price 112383 GFM - GFM- Meta- Acrylate Standard Pink Large each - Similar To Creation Std Pink or
Felxite MP pink GFM METACRYTLATE : 300 celcius 20 minutes... [More info]u$s 7.00
112854 GFM - GFM- Meta- Acrylate Luicitone Pink Large - Similar Color To Creation Light Pink - or
MP Lucitone GFM METACRYTLATE : 300 celcius 20 minutes... [More info]u$s 7.00
ACETAL RESIN
- Chemical Family: Acetal ResinsCompared with Duracetal Recommended
1. Acetal Frames ( like alloy frames )
2. Clip on Veneers
3. Tooth color clasps
4. Provisional SplintsCharacteristics
1. Inherent strength, will never break
2. More flexible than alloy frames
3. Can be re adjusted / adapted to the stone model with the heatgun ( this could never be done in an alloy frame )
4. Can be thinned down without loss of memory or shade - Allowing delicate clasps designs
5. Clasps and roach type clasps feasible
6. Requires a careful design in blocking out undercuts areas, clasp positions, retainers and supports, like in the alloy frames in
7. Chrome cobalt
8. Nothing will stick to it ( like in alloy frames either )
9. Acrylic will stick on it based on mechanical retentions ( like inalloy frames )
10. Can not be easily repaired ( like alloy frames either )
11. Tooth Color Shades: 61, 62, 65, 66, 67, 69, 77, 81 and cross linkto Vita shades too ( A1 A2 etc )12. No Pinks or Clear shades availableINSTRUCTIONS
475/246 FAHRENHEIT/Celius 15 MIN
Code Name Price 100715 GFM - GFM- Acetaltooth Color A2 Medium Ea - ( Cartridge ) ( Cartridge ) [More info]
u$s 8.25
114360 GFM - GFM- Acetaltooth Color A3.5 Medium Ea - ( Cartridge ) ( Cartridge ) [More info]
u$s 8.25
114361 GFM - GFM- Acetaltooth Color B3 Medium Ea - ( Cartridge ) ( Cartridge ) [More info]
u$s 8.25
G.F.M. FLEXIBLE MATERIAL
1) Plastic is too rigid or not flexible as i is supposed to be
Provable reasons :
a) If cooked in boiling water
b) If underheated. Not heated to proper temperature to obtain the correct melt.
c) If way overheated
d) Is Not the correct plastic
2) Plastic breaks
Possible reasosns
a) If sprued incorrectly. if you run two sepatate small sprues to either side of the horseshoe you will always have a weaker bond in the middle where the plastic meets. The reason is simple. It takes time for the plastic to flow into the horse. Make one big sprue, flatened on the centerof the horse shoe.
b) If underheated. Not heated to proper temperature to obtain the correct melt.
c) If way overheated
d) Is Not the correct plastic
2) Cartridge explodes when heating
a) Thre is only one reason for the cartridge explosion when heated : Humidity in the Powder
Once you start heating the cartridge, the small chamber fills with steam and it becomes a amall pressure pot.
Minutes later, the Ca, will blow a couple centimeters up, inside the oven/ injector's chamber.
Reasons why you got Humidity inside the cartridge ?
1) Not well dried during cartridge preparation
2) Not well storaged
3) During shipping , for some reason, the box got wet
Solution :
With a thick NAIL, make a hole in the center of the cartridge Cap. ( the membrane where the cartridge opens at the moment of injection )
Place the cartridge inside the injector, or inside a small oven ( regular family toaster ) , with the hole you have just made, pointing up.
Set up the temperature to 70- 80 celcus and leave it there for 30 minutes.
The steam , will have a gate away , and there will be no pressure , cause the steam will have a way out.
Once is t is dry , there will be no problem at the moment of heating the cartridge.
Familia de Productos QuÃmicos: Acetal ResinsCompared con Duracetal Recomendado
1. Acetal Marcos (como los marcos de aleación)
2. Clip de chapas
3. Broches de color del diente
4. Las férulas provisionales
caracterÃsticas
1. Fuerza inherente, nunca se romperá
2. Más flexible que los marcos de aleación
3. Se puede volver a ajustar / adaptar el modelo de piedra con la pistola de calor (esto no podrÃa hacerse en un marco de aleación)
4. Puede ser adelgazada, sin pérdida de la memoria o la sombra - Permitir que los diseños de broches delicados
5. Cierres y hebillas tipo de cucarachas viables
6. Requiere un cuidado diseño en el bloqueo de las áreas retentivas, las posiciones de los ganchos, retenedores y apoyos, como en los marcos de aleación de
7. cromo cobalto
8. Nada se adhieren a ella (como en los marcos de aleación o bien)
9. AcrÃlico se pegue en él sobre la base de retenciones mecánicas (como los marcos inalloy)
10. No se puede reparar fácilmente (como los marcos de aleación o bien)
11. Diente de sombras Color: 61, 62, 65, 66, 67, 69, 77, 81 y cruz linkto colores Vita también (A1 A2, etc) 12. No hay rosa o tonos claros disponibles
INSTRUCCIONES
475/246 Fahrenheit / Celius 15 MIN
1) El plastico es demasiado rigido o flexible, no como i se supone que es
Razones demostrables:
a) Si se cuece en agua hirviendo
b) Si suficiente calefaccion. No se calienta a la temperatura adecuada para obtener la fusion correcta.
c) Si asi recalentado
d) no es la correcta plastico
2) descansos de plastico
razones posibles
a) Si sprued incorrectamente. si llegas a dos bebederos separando pequenas a cada lado de la herradura, usted siempre tendra un vinculo mas debil en el centro, donde el plastico se reune. La razon es simple. Toma tiempo para que el plastico a fluir en el caballo. Hacer un bebedero grande, plano en el centro la herradura.
b) Si suficiente calefaccion. No se calienta a la temperatura adecuada para obtener la fusion correcta.
c) Si asi recalentado
d) no es la correcta plastico
2) Cartucho estalla cuando se calienta
a) Esta es solo una de las razones de la explosion del cartucho cuando se calienta: La humedad en el polvo
Una vez que empiece a calentar el cartucho, la pequena camara llena de vapor de agua y se convierte en una olla a presion.
Minutos despues, el Ca, soplara un par de centimetros hacia arriba, dentro de la camara del horno / inyector.
Razones por las que recibio de humedad en el interior del cartucho?
1) No bien se seca durante la preparacion del cartucho
2) No muy bien empaquetado
3) Durante el envio, por alguna razon, el cuadro se mojo
Solucion:
Con un clavo grueso, hacer un agujero en el centro de la tapa del cartucho. (La membrana cuando el cartucho se abre en el momento de la inyeccion)
Coloque el cartucho en el interior del inyector, o dentro de un pequeno horno (tostador regular de la familia), con el agujero que acaba de realizar, apuntando hacia arriba.
Configure la temperatura a 70 - 80 Celcios y dejarlo alli durante 30 minutos.
El vapor, tendra una puerta de distancia, y no habra presion, hacer que el vapor tendra una salida.
Una vez que es t esta seco, no habra ningun problema en el momento de calentar el cartucho.
You might also be interested in :
GFM- 112775
GFM Flex-Light pink Medium
GFM- Flex-Light pink color Medium Ea-25mm / 1in Diam [ 300 Celcius 11 Minutes ] ( similar to Flexite Light Pink )( Cartridge ) ( Cartridge )
u$s 4.99
Add to Cart
Qty:
More info
Send
GFM- 112875
GFM D-Flex Intense Larg
GFM- D-Flex Intense Pink Large Ea-25mm / 1in Diam ( Cartridge ) 280 Celcius - 15 minutes ( large +2 )
u$s 9.43
Add to Cart
Qty:
More info
Send
GFM- 112874
GFM D-Flex Intense Med
GFM- D-Flex Intense Pink Medium Ea-25mm / 1in Diam ( Cartridge ) 280 Celcius - 15 minutes ( large +2 )
u$s 7.25
Add to Cart
Qty:
More info
Send
GFM- 101667
GFM Standard Pink Medium
GFM- Standard Pink Medium Ea -25mm/ 1In Diam [ 300 Celcius 11 Minutes ] [ similar to Valplast Light pink ( Cartridge ) ] ( Cartridge )
u$s 4.99
Add to Cart
Qty:
More info
Send
Reviews
English
Español
PortuguêsOverall Rating
Write a review
Be the first to review this products
Evaluación total
Escriba un comentario
Sea el primero en comentar estos productos
Classificação
Escreva um comentário
Seja o primeiro a comentar estes produtos
TO ORDER 1 954 874 6325
Fort Lauderdale FLORIDA USA ARGENTINA (54) 11 5258 7148
CORDOBA (54) (351) 569-1409
COLOMBIA (57) 1 489 9051
PERU (51) 1 705 53 71
BRAZIL (55) 11 3711 9401
6555 NW Powerline Rd suite # 211-212 - Fort Lauderdale 33309 USA
Sign in using our Secure Server